 |
- Temperature up to -20°C / -40°C (AC room)
- Upright models with small foot prints
|
- Validation protocol with IQ, OQ, DQ Documentation as per ICH guideline
|
| |
 |
- Machine filled PUF insulation to eliminate void pockets
- Hermetically sealed Compressor with CFC free refrigerant
- Unique design of thermal barrier for better energy efficiency
|
- Microprocessor controller with LED display
- Sensor failure alarm
|
| |
 |
- Digital LED display of Temperature with set, process value & audio visual alarm
- Adjustable trays
|
- Data logger for 8 Point temperature recording with sensor, printer interface and software (Optional)
- Also available 4” LCD version with additional features
|
| |
 |
- Alarms for high/low set parameters
- Electrical circuit breaker
|
- Time delay for compressor switch on
- Overload cut off relay for compressor
|
| |
| Features of Software complying to 21 CFR part 11 |
- Multiple level alpha numerical password with password ageing
- Electronic signature and menu entered comment
- Secured audit trail report
- Alarm report with mention of alarm condition
- Mean Kinetic Temperature able to be calculated for any days & alarm deviation report
- Reports in graphical and tabular form
- Data Stored in PC server with Lan connectivity and can be monitored on any PC with password authentication
- Multi chamber data acquisition on single software
|
| |
| Additional Features for LCD version:- |
- 4 Inch attractive LCD display
- Intelligent Controller helps maintain temperature in case of sensor failure
- Battery Backup for Temperature Controller - 12 V, Secured audit trail report
7.2 Ah sealed maintenance free, Fully charged Alarm report with mention of alarm condition
battery runs for more than eight hours
- Automatic Calibration
- Self-Diagnosis for errors
- Histogram format of 24 hours temperature recording
- Power failure and resumption recorded with date and time
- Settable High / low alarm points with date and time
- Memory for storage of upto 1000 records
- Centronic interface to record Temperature, Date, & Time by attaching Dot Matrix printer with adjustable print interval
- Alarm on equipment /security gate
- PC communication with RS-485 and software complying to 21 CFR part 11 as per USFDA guidelines
|
| |
| GMP versions are available only with LCD display
with its built-in features and software |
 |
 |
| |
| Technical data |
| |
RQV-200 Plus |
RQV-300 Plus |
RQV-400 Plus |
RQV-500 Plus |
RQV-600 Plus |
RQVD-200 Plus |
RQVD-300 Plus |
RQVD-400 Plus |
| Internal Volume (Liters) |
200 |
300 |
400 |
500 |
600 |
200 |
300 |
400 |
| Number of trays |
2 |
3 |
4 |
5 |
6 |
2 |
3 |
4 |
| Internal Dimensions W x D x H (mm) |
640x755x430 |
640x755x630 |
640x755x830 |
640x755x1030 |
640x755x1230 |
640x755x 430 |
640x755x 630 |
640x755x830 |
| External Dimensions W x D x H (mm) |
800x975x1020 |
800x975x1220 |
800x975x1420 |
800x975x1620 |
800x975x1820 |
800x975x1020 |
800x975x1220 |
800x975x1420 |
| Minimum Temperature |
-20°C |
-40°C (AC room) |
| Insulation (CFC free polyurethane foam) |
70 mm minimum for Body & 80 mm for Door |
80 mm minimum for Body & 80 mm for Door |
| Temperature control |
Microprocessor |
| Display |
1" - 7 Segment, Big Size LED |
| Power Failure Alarm |
Audio Visual Alarm |
| Door Open Alarm |
Audio Alarm in case door open for over one minute |
| Internal Body Material |
Stainless Steel - 304 grade (Standard Models), Stainless Steel - 316 grade (GMP Models) |
| External Body Material |
Powder Coated CRCA Steel (Standard Models), Stainless Steel - 304 grade (GMP Models) |
| Noise Level |
Less Than 65 db(A) |
| Recommended Voltage Stabilizer |
VS-02 |
VS-02 |
VS-03 |
VS-03 |
VS-03 |
VS-02 |
VS-03 |
VS-03 |
| Electrical |
220-240 volts, 50Hz, Single Phase |
|
Range of Lab Equipments 
