Tel.: +91 - 22 - 4058 9888
Fax: +91 - 22 - 4058 9890
E-mail:
sales@remilabworld.com
Walk In Chamber
REMI Walk in chambers are designed for simulating, monitoring & control of environmental conditions like temperature & humidity. All these chambers are double walled & modular in construction, easy to assemble at site. They are available in standard sizes & can also be tailor made to suit specific requirements. Forced air circulation with the help of fan blower maintains uniform conditions. Use of intelligent control systems & dedicated REMI software complying to 21 CFR Part 11 requirements greatly enhances the performance. These chambers can be provided with standby refrigeration & humidity systems (optional) for uninterrupted functioning.
CONSTRUCTION
  • Double walled prefabricated modular panels with PUF insulation, easy to assemble at site
  • Standard model with inner of Stainless Steel (304 Grade) and outer Powder coated steel sheet
  • GMP model with inner (316Grade) and outer of Stainless Steel (304 Grade)
  • CFC free Refrigeration system with split type condensing unit located outside lab helps to emit hot air beyond working area
  • Heating by long lasting SS tubular heaters
  • Humidity by steam injection. Boiler and water reservoir made of SS with heater and low water level cut off
  • Forced Air Circulation by heavy duty motor
  • SS racks and trays
  • Designed as per ICH guidelines to meet, WHO and USFDA requirement
  • Fulfills storage conditions of 25 C-60% RH, 400C-75% RH, 300C-65% RH 25-40% RH, 30 C-35% RH
  • Temperature Range: 20 C to 60 C, Accuracy:+0.2 C, Uniformity:+1 C (STABILITY CHAMBERS)
  • Humidity range: 40% RH to 95% RH, Accuracy:+2% RH, Uniformity:+3%RH (STABILITY CHAMBERS)
  • Temperature Range:2 C to 8 C, Accuracy:+0.2 C, Uniformity:+1 C (COLD ROOMS)
  • Standby refrigeration system available for uninterrupted functioning (Optional)
  • Standby humidity system available for uninterrupted functioning (Optional)
 
  • Microprocessor based auto tuning PID controller provided for precise control of temperature and humidity
  • Auto change over to standby systems through PLC (Optional)
  • Auto switch over to standby sensor in case of Controlling Sensor failure
  • PLC with touch screen HMI fully protected with password, instead of PID controller for precise control of temperature and humidity (optional)
  • Data stored in PC server with LAN connectivity and password protection (Optional with software)
  • GSM mobile alert on six cell phones via SMS in case of temperature and humidity deviations beyond specified Limits (Optional with software)
 
  • Capacitance type Humidity sensor enables direct display of RH and temperature (STABILITY CHAMBERS)
  • PC communication via Ethernet/RS-485 and software complying to 21CFR part 11 USFDA guidelines (Optional)
  • Multipoint Temperature and Humidity logger with printout facility (optional)
  • Facility to open the door from inside in case of door locked with emergency bell having switch inside chamber
  • Thirty chambers connected to one software
  • Integration with BMS
 
  • Audio visual alarm for temperature, humidity variations and utility failures
  • Output for remote alarm in lab and at security gate
  • Magnetic door lock system with biometrics for door access and software to monitor door open log (Optional)
  • Safety includes shut off of humidity and air heaters in case of temperature overshoots or undershoots beyond specified limits with alarms
  • Electrical circuit breaker
  • Low water level alarm and power cut off of boiler tank heater
  • Overload cut off relay for compressor
  • Time delay for compressor switch on
 
  1. Intelligent PLC/PID control system helps maintain highly accurate set parameters
  2. Biometrics system for secured door access
  3. Dual Capacitance type Humidity Sensors failure of one sensor automatically transfers regulation to other sensor
  4. Chamber illumination by fluorescent tubes
  5. PUF Insulation 80 mm for maximum thermal protection
  6. Spring Door Latch for door closure
  7. Blower Motor for forced air circulation
  8. Control panel with Data-logger, PC connectivity and electrical components
  9. Standby refrigeration by Compressor-1 and Compressor-2
  10. Standby humidity by Heater-1 and Heater-2
  11. Emergency bell switch to open the door from inside
  12. Highly ergonomic handle with unique multi lever key lock
  13. SS Racks and Trays
 

Features of Remi Software complying to 21 CFR Part 11

  • Multiple level alpha numerical passwords with password ageing
  • Electronic signature
  • Secured audit trail report
  • Alarm report with mention of alarm condition
  • Mean Kinetic Temperature, can be calculated for user defined period
  • Reports in graphical and tabular form
  • Data stored in PC server with LAN connectivity, accessible on any PC with password authentication
  • Blocked user access after three unsuccessful login attempts
  • Multi chamber data acquisition on single software supports 30 machines
  • Supports communication through Ethernet / RS-485
  • Supports web based online remote access via Ethernet
  • GSM mobile alert on six cell phones via SMS in case of deviations
  • Biometrics system for door access by authorized person with log
  • Possible to integrate with BMS
  • Online and offline Trends
 
OPTIONAL ACCESSORIES
  • PLC Based Control System with HMI Touch Screen Mono lit
  • Software compliant to 21 CFR Part 11 requirements
  • Data logger with 8 / 16 Sensors (4+4 / 8+8 Temperature and Humidity)
  • Standby Refrigeration System
  • Standby Humidity System
  • Biometrics Magnetic Door Access for Secured Door opening with software to maintain log
  • GSM Mobile Alert for six Numbers
Technical Data
WALK-IN STABILITY CHAMBERS WSC-50 WSC-80 WSC-100 WSC-120 WSC-150
WALK-IN COLD ROOM WCR-50 WCR-80 WCR-100 WCR-120 WCR-150
Internal Volume (Liters) 5000 8000 10000 12500 15000
Number of Shelves 16 24 32 48 48
Internal Dimension W x D x H (mm) 1250 x 2000 x 2000 2000 x 2000 x 2000 2000 x 2000 x 2500 2000 x 2500 x 2400 2500 x 2500 x 2400
External Dimension W x D x H (mm) 1410 x 2950 x 2160 2160 x 2950 x 2160 2160 x 2950 x 2660 2160 x 3450 x 2560 2660 x 3450 x 2560
Internal Body Material Stainless Steel 304 grade (Standard Models), Stainless Steel 316 grade (GMP Models)
External Body Material Powder Coated CRCA Steel (Standard Models), Stainless Steel 304 grade (GMP Models)
Insulation 80 mm minimum, CFC free polyurethane foam
Illumination Fluorescent Tubes
Control & Display Microprocessor based PID control system with large 4" LCD Display
Power Failure Alarm Audio Visual Alarm
Door Open Alarm Audio Alarm in case door open for over one minute
Electrical 220-240 volts, 50Hz, Single Phase
       
  Walk-in Stability Chambers Walk-in Cold Rooms
Sensor Capacitance type direct reading PT-100
Temperature Range & Accuracy 20°C to 60°C, ± 1°C 2°C to 8°C, ± 1°C
Humidity Range (Rh) & Accuracy 40% to 95%, ± 3% RH xx
Audio Visual Variation Alarm Set Humidity ± 3% RH,, Set Temperature ± 2°C Set Temperature ± 2°C
 
^TOP
PRODUCT SELECTION
Laboratory Division
Blood Bank Division
Healthcare Division
 
 
Asia Pharma Expo
Bangladesh
Feb. 23rd to 25th, 2016
VIEW ALL
 
 
REMI Profile
» Why Us
» Company Profile
» Careers
» Events
  » Certification
» Synergies
» Infrastructure Details
» Major Landmarks
  Others  
  » E catalogue
» Product Application
» Clientele
» Pioneers
  » REMI Corporate
» Design and Development
» Corporate Social Responsibility
» Virtual Factory Tour
  Remi House
  3rd Floor, 11, Cama Industrial Estate
Walbhat Road, Goregaon (East) Mumbai - 400 063, INDIA.
Tel.: +91 - 22 - 4058 9888 Fax: +91 - 22 - 4058 9890
E-mail: sales@remilabworld.com
Home | Profile | Products | Contact | Careers | Policy | Sitemap | Resources | Powered by © 2016 REMI GROUP. All Rights Reserved.