The REMI Humidity Chambers are designed for testing of electronic, electrical components, corrosion studies on mechanical parts, shelf life studies on paints, varnishes and cement at respective manufacturing facilities. These chambers control precise temperature and humidity.
Seed Germinators are used for germination & biological studies, which includes UV, Fluorescent lights coupled with 24 hours cyclic timer for lights on/off regulation.
These chambers are available in standard & GMP versions.
Temperature range 10°C to 60°C, Humidity range 40% to 95% Rh
Precise monitoring of temperature and humidity conditions
Powerful fan motor for forced air circulation to maintain uniform conditions inside chamber
Heating by long life SS tubular heaters
Validation protocol with IQ, OQ, DQ Documentation as per ICH guidelines
Microprocessor controller with LCD display & capacitance type sensor for precise control of temperature and humidity
4 Inch attractive LCD display for direct display of humidity & temperature
Battery Backup for Controller - 12 V, 7.2 Ah sealed
maintenance free, Fully charged battery runs for
more than eight hours
Automatic Calibration of set parameters
Self-Diagnosis for errors
Power failure and resumption recorded with date and time
Machine filled PUF insulation to eliminate void pockets
Unique design of thermal barrier for better energy efficiency
Hermetically sealed Compressor with CFC free refrigerant
Histogram format of 24 hours temperature & humidity recording
Settable High / low alarm points with date and time
Memory for storage of up to 1000 records
Centronic interface to record Temperature, Humidity, Date, & Time by attaching Dot Matrix printer with adjustable print interval
Chamber calibration port on side
Adjustable trays
PC communication with RS-485 and software compiling to 21 CFR part 11 as per USFDA guidelines (Optional)
Data logger for 8 Point (4 + 4) temperature / humidity recording with sensor, printer interface and software (Optional)
Low water level alarm and power cutoff of boiler tank heater
High temperature safety cut off & alarms for high/low set parameters
Electrical circuit breaker
Time delay for compressor switch on
Overload cut off relay for compressor
Features of Software complying to 21 CFR part 11
Multiple level alpha numerical password with password ageing
Electronic signature and menu entered comment
Secured audit trail report
Alarm report with mention of alarm condition
Mean Kinetic Temperature able to be calculated for any days & alarm deviation report
Reports in graphical and tabular form
Data Stored in PC server with Lan connectivity and can be monitored on any PC with password authentication
Multi chamber data acquisition on single software
Technical Data
CHM-6 Plus /
SG-6 Plus
CHM-10 Plus /
SG-10 Plus
CHM-12 Plus
CHM-16 Plus
CHM-19 Plus
Internal Volume (Liters)
200
280
370
450
540
Number of Shelves
2 / 3
3 / 5
4
5
6
Internal Dimensions W x D x H (mm)
660 x 655 x 450
660 x 655 x 650
660 x 655 x 850
660 x 655 x 1050
660 x 655 x 1250
External Dimensions W x D x H (mm)
800 x 1095 x 1020
800 x 1095 x 1220
800 x 1095 x 1420
800 x 1095 x 1620
800 x 1095 x 1820
Temperature Range & Accuracy
10°C to 60°C, ± 1°C
Humidity Range (Rh) & Accuracy
40% to 95%, ± 3%
Temperature & Humidity control
Microprocessor with Capacitance type sensor
Display
4" LCD Screen, Large size Display for ease of reading
Power Failure Alarm
Audio Visual Alarm
Door Open Alarm
Audio Alarm in case door open for over one minute
Temperature / Humidity Variation Alarm
Set Humidity ± 3%, Set Temperature ± 2°C, Audio Visual Alarm
Range of Lab Equipments 
