Tel.: +91 - 22 - 4058 9888
Fax: +91 - 22 - 4058 9890
E-mail:
sales@remilabworld.com
Tube Sealer
 
Optiseal -Bench top sealer for heavy-duty use

Bench top sealer for heavy-duty use, especially in blood processing labs.

The bench top sealer, Optiseal, has been designed to meet high standards in blood components processing: consistent high quality sealing, excellent performance after repeated use, safety features and easy use.

Easy use
•  Automatic sealing process (when tube is placed in the slot of Head unit)
•  LED lights for visual process control
•  Tube is easily pulled apart (adjustable tear force)
•  Front electrode can be easily removed for cleaning

Safety Features
•  Splashand touch protected sealing area

Consistent high quality sealing and excellent performance
•  For all type and size of tubes (up to 5mm outer diameter)
•  For sealing (0.6-3 sec0 with a sophisticated sensing system to automatically adapt sealing time
•  Up to 1000 seals per hour (fan-cooled electrode ensures consistent sealing quality)

Technical Specifications

Part No.

FDR4363, for complete sealing system

Sealing Capacity

Up to 1000 seals per hour

Sealing Time

0.6-3 sec. Depending on tubing

RF Output

150W max. /50Ω/ 40.680 Mhz

Input Power

115/230 V~ -50/60 Hz, Auto range sensing system

Consumption

395 VA

Size(W x H x D)

195x150x260mm (7.6x5.9x10.2 in)

Weight kg (oz)

5.2 kg (11.5 oz)

In Compliance

CE marked

With regulations

As per Council Directive 93/42EEC on Medical Devices

Handyseal -Portable battery-operated sealer
Portable battery-operated sealer for routine use, especially at the donor.
Handy seal can seal different types and sizes of tubes of up to 5mm outer diameter due to a sophisticated sensing system, which automatically adapts the sealing time.
It makes over 700 quality seals with one battery case, which takes approximately two hours to recharge.
Due to minimal size and weight, HandySeal is ideally suited for portable use (donation) sessions, processing lab).
The CE marking ensures compliance with the Council Director 93/42/EEC on Medical Devices (MMD).

Parameter

Technical Specifications

Part No

FDR4367, for complete sealing system, which includes Battery unit, Hand unit, Battery charger and Carrying bag. Order separate mains connector for outside Europe standard.

Sealing Capacity

700 seals per charged battery for PVC tubes of up to 5mm outer diameter at 20°C (68°F)

Input Power

Loader: 100-240V~ -50/60 Hz                Battery:13.2VDC,2.2Ah NiMH.

Consumption

Loader: 30W Sealer: 120W max

Fuses

Loader: T 2 A 250 V (internal)               Battery: 2A(input)/10A(outer)(internal)

RF Output

70 max./50S/40.680Mhz

Size mm (in)

Battery unit : 165x106x32 mm (6.5x4.2x1.2 in)

Weight kg (lb)

Battery unit : 0.95 kg (2.1 lb)                  Hand unit: 0.35kg (0.8 lb)

In compliance with

EN 60601-1:1990 with A1 and A12: 1993, A2: 1995 and A13: 1996 (Safety)
EN 60601-1-2: 1993 (Electromagnetic compatibility)

Electrical safety

During use: Internal power supply. Type B: (EN60601-1 Stds) During loading : Class (IEC 950 Stds)

Auto Seal Tube Sealer -battery operated, hand-held, portable
The Auto Seal Tube Sealer is a battery operated, hand-held, portable tube sealer. This sealer easily creates hermetic, snap-apart seals and incorporates a user-friendly one-touch design.
Benefits Features

•  Minimal user effort required
•  Adapts to different tube sizes
•  Meets high output demands
•  Long battery life

•  One touch sealing activation
•  Automatic sensing system
•  Heavy duty construction
•  NiMH battery

Technical Specifications

Size

Base Unit: 10” x  6.3” x  2.75” Handle: 8.3” Long V-50/60 Hz Cable: 7” Long

Weight

Base Unit: 9.0 lbs. Handle: 0.5 lbs.

Voltage for battery charger

100/240 V-50/60 Hz Auto range sensing

Battery

28 VDC, 2.2 Ah, Nimh

Accessories

Replacement Battery, Code 4R4370 Seal Bench Mate, Code 4R4371 Power Unit for AutoSeal, Code 4R4372

Consumption

395 VA

Size (W x H x D)

195x150x260mm (7.6x5.9x10.2 in)

Weight kg (oz)

5.2 kg (11.5 oz)

In Compliance

CE marked

With regulations

As per Council Directive 93/42EEC on Medical Devices

Hematron III -Fully automatic system
Hematron III is a fully automatic system for sealing PVC tubings, especially for tubes in blood pack systems.
The new CE marking ensures that the Hematron III meets the Council Directive On medical devices.

Different types or sizes of tubes can be sealed as the Hematron® III is equipped with a sophisticated sensing system which automatically adapts the sealing time.

Hematron III sealer is equipped with compressed air, and sealing starts when The seal button is pressed (no more hand power needed)

Technical Specifications

REF (catalogue number)

 

FDR 4360

Power Input

Voltage:

115/230V~ -50/60 HzAuto range sensing

Consumption: 

395 VA

Fuses:

2 x T2 AH 250 V

RF-Generator

Output:

150W max/50 S

Frequency:

40.680 MHz Crystal

Pressure pump

Flow:

2 bar max.

Pressure:

5.2 kg (11.5 oz)

Size (Main Unit)

Depth:

260 mm

Width:

160 mm

Height: 

70 mm

Weight: 

2,40 kg

Size (Hand Unit)

Depth:

210 mm

Width:

0,22 kg

Cable:

2,23 m

Regulations

Compliance with the Council Directive on medical devices (93/42/EEC)

Hematron CR4 -built for sealing especially for bloodbags tubes

Hematron CR 4 is built for sealing PVC-tubes, especially for bloodbags tubes or apheresis sets.
CR 4 has a powerful RF-unit which makes it suitable both for routine procedures at donation rooms and repeated operations at preparation rooms without overheating.
CR 4 gives a wide and  safe seal and you can easily pull the tubes apart. The power unit can either be connected to
•  a bench unit
•  a handle unit
•  a Quad plus unit
The bench unit & Quad plus unit automatically  seals when a tube is in position. The handle unit is easy to move and therefore it is easy to reach the part of the tube which shall be sealed.

Technical Specifications

Voltage demands

100/115/230/240 VAC 50/60 Hz

Power consumption

220 VA

Internal fuse

Protection for high currant, type PTC

Sealing time

Adjustable 0,5-5 sec

Frequency

40,68 MHz

Output rf power

70 W

Dimensions

290(L) x 220(W) x 88(H) mm (incl. rf-outlet)

Weight

4,1 kg

Operation

Continuously

Classification

Protection against electrical chock: class I type B.

Safety approval

IEC 601-1

EMC approval

IEC 601-1-2 emission EN55011 group 2 class B

Bench unit

180(L) x 75(W) x 75(H) mm

Weight

1 kg

Length of cable

1,9 m

Sealing handle

206(L) x 35(H) x 27(W) mm

Weight

0,3 kg

Length of cable

1,9 m (4,3 m or 9,2 m cable is available as an option

Hematron CR6 -battery operated sealing unit especially bloodbags tubes

Hematron CR 6 is a battery operated sealing unit for PVC-tubes, especially bloodbags tubes or sets for plasmaferes.
Hematron CR 6 is with new and fully loaded batteries it manages more than 1000 seals on PVC-tubes. The high capacity makes it suitable to use CR 6 both in donation rooms, laboratories and in mobile use.

Hematron CR 6 is comprised of  3 units:
•  Sealing handle with coax cable 1,9 m.
•  Power unit with batteries, Rf generator and a control unit monitored by a micro processor.
•  Battery charger.

Optional there is a carry bag For mobile use.

Technical Specifications

Batteries

2 x 12V 2Ah
Manufacture:Sonnenschein A500

Internal fuse

Overload protection type PTC, self recovery

Effect consumption

120 W maximum effect

Sealing time

Adjustable 0,5-5 sec

Frequency

40,68 MHz crystal controlled

Output effect

70 W maximum effect

Dimensions

266 x 119 x 88 mm (L x W x H) (incl. rf- outlet)

Weight

3, 1 kg incl. batteries

Operation

Continuously

Classification

Protection against electrical chock: class II type B.

Safety approval

IEC 60601-1 (IEC601-1)

EMC approval

IEC 60601-1-2 (IEC601-1-2) emission EN55011 group 2 class B

Quad Plus
Quad Plus Unit:
Dimension: 220(L) x 319(W) x 60(H) mm
Weight: 3,9 kg
Length of cable: 1,5 mv

Bench Unit:
Dimension: 150(L) x 75(W) x 73(H) mm
Weight: 0,9 kg
Length of cable: 1,9 m

Handle Unit:
Dimension: 206(L) x 27(W) x 35(H) mm
Weight: 0,3 kg
Length of cable: 1,9 m (4,3 m or 9,2 m
cable is available as an option

^ TOP
PRODUCT SELECTION
Laboratory Division
Blood Bank Division
Healthcare Division
 
 
CPHI PMEC
India
Dec. 2nd to 4th, 2014
VIEW ALL
 
 
REMI Profile
» Why Us
» Company Profile
» Careers
» Events
  » Certification
» Synergies
» Infrastructure Details
» Major Landmarks
  Others  
  » E catalogue
» Product Application
» Clientele
» Pioneers
  » REMI Corporate
» Design and Development
» Corporate Social Responsibility
» Virtual Factory Tour
  Remi House
  3rd Floor, 11, Cama Industrial Estate
Walbhat Road, Goregaon (East) Mumbai - 400 063, INDIA.
Tel.: +91 - 22 - 4058 9888 Fax: +91 - 22 - 4058 9890
E-mail: sales@remilabworld.com
Home | Profile | Products | Contact | Careers | Policy | Sitemap | Resources | Powered by © 2014 REMI GROUP. All Rights Reserved.