Laboratory Centrifuges Plus

| Laboratory Products | Laboratory Centrifuges Plus

Laboratory Centrifuges model R-8C BL & R-8M are suitable for routine sample analysis in Medical, Hospital, Pathology and Institutional laboratories. With a wide choice of rotor heads and adaptors, these units are truly versatile.

Micro Centrifuges models RM-12C BL & R-12M are ideal for growing routine application in biochemical and clinical labs, for Hematocrit, Corpuscle Percentage contents in blood, Serum analysis and precipitate separation etc.

  • Stable speed output even under unstable voltage conditions
  • Low sample temperature rise
  • High Capacity (R-8C BL / R-8M)
  • High Speed (RM-12C BL / R-12M)
  • Wide variety of rotors & reduction adaptors
  • Brushless Induction motor with frequency drive
  • Microprocessor controller with digital display
  • Smooth & soft start
  • Inverter fault detection with auto shutdown
  • 7 segment LED display of speed Digital countdown timer & continuous run
  • Dynamic brake for quick deceleration
  • Last set parameters recall (Useful for repetitive analysis)
  • Automatic door opening
  • Stainless Steel centrifuge Chamber, easy to clean
  • Safety lid interlock to prevent lid opening during centrifugation
  • Imbalance detection & centrifugation stop with display of error
  • Motor overload protection
  • Gas hinge to prevent door falling
Models R-8M & R-12M are advanced versions having following additional features:
  • Feather touch setting keys
  • Alphanumeric LCD display of speed & RCF
  • Selection of 3 acceleration & deceleration profiles

Technical Data
Models R-8C BL R-8M RM-12C BL R-12M
Max. Speed rpm 6000 16000
Max. RCF ‘g’ 5070 16600
Max. Capacity ml 400 40
Digital timer range Min 0-59 0-15
W x D x H Mm 380x460x305 380 x 460 x 305

Supply:220-240Volts 50Hz Single Phase.

Rotors Heads Listing for RM-12C BL / R-12M
Models Capacity Max. Speed RPM Max. RCF ‘g’
RM-1210 Micro Hematocrit Rotor for 24 Capillaries (75 X 1 mm) 12000 15300
RM-1211 Micro Hematocrit Rotor for 12 capillaries (QBC -II Plus) 12000 15300
RM-1212 Heparinized capillary tubes (75mm x 1 mm bore)
RM-1213 Reading Device for RM-1210
Angle heads
RM-1214 10 X 2ml with Glass Tubes & reduction adaptors of 1 ml & 0.5ml 16000 16600
RM-1215 24 X 1.5ml with Tapered bottom Polypropylene tubes & reduction adaptors of 1 ml & 0.4ml 11850 12715
RM-1216 8 X 5ml with round bottom Polypropylene tubes & reduction adaptors of 4ml & 2ml 11850 13500
RM-1217 4 strips of 8 X 0.2ml (PCR Strip Tubes) 12000 11910
Rotor Heads Listing for R-8C BL / R-8M
Models Capacity Max. Speed RPM Max. RCF ‘g’ Models Capacity Max. Speed RPM Max. RCF ‘g’
Swing out Heads (with graduated glass tubes) Angle Heads (with polypropylene tubes)
R-81 16 x 15 ml 4500 3485 R-83 16 x 15 ml 5250 4280
R-81 A 12 x 15 ml 4500 3485 R-83 A 12 x 15 ml 5250 4280
R-81 B 8 x 15 ml 4500 3440 R-B3 B 8 x 15 ml 6000 4700
R-82 6 x 50 ml 4500 3530 R-84 6 x 50 ml 6000 4700
R-82A 4 x 50 ml 4500 3485 R-84 A 4 x 50 ml 6000 4700
R-90 (with Biosafety cap] 4 x 100 ml 4000 2500 R-88 4 x 100 ml 6000 4550
R-89 24 x 15 ml 6000 5070
Reduction Adaptors for R-8C BL / R-8M
Models Capacity R-81 R-81 A R-81 B R-82 R-82 A R-83 R-83 A R-83 B R-84 R-84 A R-88 R-89 R-90
RA-151 1 x wintrob
RA-152 1 x 3ml
RA-153 1 x 5ml
RA-154 1 x 8ml
RA-155 1 x 4ml
RA-156 1 x 6ml
RA-157 1 x 50ml
RA-158 1 x 30ml
RA-160 1 x 15ml
RA-166 3 x 15ml
RA-501 1 x 15 ml
RA-502 1 x 30ml
Suitable for Falcon Tubes (without tubes)
RA-501 F 1 x 15ml
RA-1B0F 1 x 15ml
RA-161F 1 x 50ml
Suitable for Vacutainer Tubes (without tubes)
RA-162 1 x upto 5ml (75 mm long)
RA-163 1 x upto 6ml (100 mm long)
RA-164 1 x upto 10 ml (100 mm long)
RA-167 4 x upto 6ml (100 mm long)
RA-168 3 x upto 10 ml (100 mm long)